Additional Installation Instructions; Installing From The Cd-Rom For Windows 3.1 - Epson colour 640 Printer Basics Manual

Additional Installation Instructions

Additional Installation Instructions
If the Start Here card referred you to Printer Basics for installation instructions, see
the section below that applies.

Installing from the CD-ROM for Windows 3.1

If you need to install the printer software from the CD-ROM and you are using
Windows 3.1, follow the steps below.
1. Make sure your printer is connected to the computer and both are
turned on.
2. Make sure Windows Program Manager is running. Exit any open applications.
3. Insert the EPSON software CD-ROM.
4. From the Program Manager File menu, select Run.
5. Type D:\EPSON (where D is your CD-ROM drive letter) and click OK.
6. Read the Software License Agreement and then click Agree to continue with
the installation.
7. Follow the instructions on screen to install the software. Your printer
software icons appear in the EPSON program group and the EPSON Stylus
COLOR 640 is set as your default Windows printer.
If you have Adobe Acrobat Reader on your computer, you can view the electronic
EPSON Stylus COLOR 640 Manual on your CD-ROM. Start Acrobat Reader and
open the 640DOC.PDF file in the D:\Manual directory on your CD-ROM. If you do
not have Acrobat Reader, see page 8 for installation instructions.
After you finish installing your software, you can start to print! See page 10 for more
information.
46
Note:
The creative and Internet software is not available for Windows 3.1.