Problems And Solutions; Problems Setting Up The Printer Or Using The Software - Epson colour 640 Printer Basics Manual

Problems and Solutions

Here are some basic troubleshooting tips if you have any problems setting up your
printer or printing. You can also turn to "Troubleshooting," in your electronic
manual or look in your printer software online help.

Problems Setting Up the Printer or Using the Software

If you installed the ink
cartridges and the printer
started making noise . . .
The first time you install ink
cartridges, the printer must
charge its state-of-the-art ink
delivery system. Charging
can take a few minutes.
Please wait until charging is
finished before you turn off
the printer. If you turn off
the printer while it is
charging, it will begin
charging the system again
and use more ink than
necessary.
Make sure the ink cartridge
clamps are locked down
completely and that no
packing material remains in
the printer.
If your printer makes noise
when you turn it on or after
it has been sitting for a
while . . .
Your printer is performing
routine maintenance.
34
If you're having problems
installing your printer
software . . .
Carefully follow the
instructions for installing
the printer software on
the Start Here card.
If you see a screen telling
you that new hardware is
found in Windows 95 or
Windows 98, click Cancel.
You can't install your
printer software that way.
Make sure your printer is
turned on and the printer
cable is securely connected
to the printer and
computer.
Make sure you've closed
all other applications,
including any screen savers.
Then try installing the
software again.