Autochannel Scan; Language Selection - Sylvania LC200SL8 Owner's Manual

Note:
• If you connect the cable system directly, contact the CATV
installer.
• If you press [POWER] or [SETUP] during auto channel scan,
the setting will be canceled.
• When no channel can be received by auto channetscan,
"NO TV SIGNALS" will be displayed on the TV screen.
• Channel settings will be saved even if the power fails.
• Ifyou have Spanish or French menus and need English,
press [SETUP[. Use [Cursor A/V] to select "IDIOMA"
or %ANGAGE'_ Press [ENTER] to select "ENGLISH". Press
[SETUP] to remove the main menu.
• With regard only to the digital channel, even after the
scanning is complete if you unplug the AC power cord
before turning off the unit by pressing [POWER[, the
channel setting may be lost.
[] Language Selection
You can choose English, Spanish, or French as your on-screen language,
1 Press [SETUP] to display the main menu.
2 Use [Cursor A/Y] to select"LANGUAGE", then press
[ENTER] repeatedly to change the setting.
e.g.) digital TV mode
or
- TV SETUP -
PICTURE
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE [ENGUSH]
CAPTION [OFF]
SACK LIGHT [BRIGHT]
COLOR TEMP [NORMAL]
DTVCC
NGUSH]
SPANOL]
RAN(_AIS]
Press [SETUP] to exit.
EN