Watching A Tv Program - Vizio VF550M User Manual

VIZIOVF550M UserManual
Beforeyoubeginwatching TV, pleasemakesurethatanycable,satellite or off-airantenna connections
aresecure.Also,verifythatthe power cordis plugged intoa correctly grounded e lectrical outletor surge
protector.
,
Press the power button on the remote or on the side of the HDTV. The VlZlO logo on the
front will change from orange to white.
2. There are 3 options for selecting your programming:
a. If you are using an antenna or cable connected through the DTV/TV CABLE/ANTENNA
input, you can select TV directly by pressing the TV button on the remote, or by pressing
the INPUT button on the remote or on the side of the HDTV.
b. If you are watching broadcasts through a cable or satellite set-top box connected by an
HDMI cable, select HDMI directly by pressing the HDMI button on the remote, or by
pressing the INPUT button on the remote or on the side of the HDTV.
c. If you are watching broadcasts through a cable or satellite set-top box connected by a
Component (YPbPr) cable, select Component directly by pressing the COMP button on
the remote, or by pressing the INPUT button on the remote or on the side of the HDTV.
Note: You should be able to see a picture. If you do not, make sure that all of the HDTV connections are
secure and you have selected the correct video input source. Each press of the HDMI or COMP button on
the remote control will cycle through the available inputs. Press the button until the input associated with
the device you wish to view is shown in the Info box at the upper right corner of the screen.
,
When using option 2a, press the Channel buttons on the remote or the CH • or • buttons on
the side of the HDTV to change the channel. The Channel buttons on the side of the HDTV
and on the remote, control will not work if you are watching a program using HDMI,
Component, or AV (S-Video or Composite) inputs.
Version 3/4/2009 29
www.VlZlO.com