Table of Contents
Advertisement
VIZIO E260VP User Manual
Chapter 5 Using your HDTV for the first time
Select an Input Source
Select the input source for your HDTV by pressing the INPUT button
on the remote control or the front of your TV.
Turn on your device and you will see a picture on your HDTV. If there
is no picture, make sure you have selected the correct input on your
HDTV.
Note:
If the selected device is RF connected, your HDTV needs to be
in TV mode and on either channel 3 or channel 4 matching the channel
which has been selected on the back of the VCR, Cable Box, External
TV Tuner or Satellite Receiver. Refer to Owner or User's Manual of
such equipment for details.
Watching a TV Program
Before you start watching TV, make sure that any cable, satellite or off-air antenna connections are
secure. Also, verify that the AC/DC power adapter is plugged into a correctly grounded electrical outlet or
surge protector.
1. Press the power button on the remote control. The VIZIO logo on the front will light up white.
2. Select the input to which your device is connected that provides TV programming (i.e. TV, HDMI,
COMP/AV).
Note:
You should be able to see a picture. If you do not, make sure that all of your HDTV connections
are secure and you have selected the correct video input source. Each press of the INPUT button on the
remote control will cycle through the available inputs. Press the button until the input associated with the
device you want to view is shown.
Remember, when using the TV input, the channel buttons will not work until you have performed a
channel scan.
3. When using the TV input, press the channel buttons on the remote control or the TV to change
the channel. The channel buttons will not work if you are watching a program using HDMI or
COMP/AV inputs.
18
www.VIZIO.com
Advertisement
Table of Contents
