GE Monogram ZGU48N6RWSS Dimension Manual page 2

Monogram. ™
ZGU48N6RWSS—48" Professional Gas Cooktop
Dimensions and Specifications (in inches)
7/8"
2-1/2"
8"
26-5/8"
10"
2-1/2"
High
21-1/4"
Shelf
12"
Low Back
Revised 7/97
48" Wide Hood
30" Min.
36" Max.
18" Min.
2" 17"
46-1/8"
Cooking Surface
Electric/Gas
Supply
720Dia2
12" Min. to Combustibles
Without Backguard
36" Min.
to Combustibles
13" Max.
36" Min. to
Combustible
12" Min. to
Material From
Combustible
Cooking
Material
Surface
Each Side
22-3/4" Min.
36" Min.
to Combustibles
Island Trim
Advance Planning:
Refer to dimensional drawings for appropriate
placement and necessary clearances when
planning the installation.
• Cabinetry cannot be installed directly above
the cooktop.
• This cooktop requires the installation of a vent
hood, 30" to 36" above the surface.
–The vent hood must be at least 24" deep.
–The vent hood must be the same width as
the cooktop.
–The vent hood blower should provide at least
800 CFM and up to 1200 CFM.
–Choose a vent hood with 800CFM for best
performance when operating the grill.
• Working areas adjacent to the range should
have 18" minimum clearance between
countertop and cabinet bottom.
• Clearance between cooktop and side wall or
combustible material must be at least 12" on
each side.
• This cooktop requires 8" free space below
the countertop.
• If the cooktop is installed in an island:
–Allow 12" min. clearance at the back to
combustible materials.
–Allow 36" min. above the cooking surface to
combustible materials.
• Installation must conform with local codes. In
the absence of local codes, the gas cooktop
must comply with the National Fuel Gas Code,
ANSI Z223.1, latest edition.
A.G.A. approved
For answers to your Monogram,
GE, Hotpoint and RCA appliance questions,
call GE Answer Center ® service, 800.626.2000.
U L
Listed by
Underwriters
R
Laboratories
® GE Profile, ™