Using The Optional Battery; Installing The Battery; Charging The Battery - Epson A381H Printing Manual

Epson printer parts list
Table of Contents

Advertisement

4. Press
or
to highlight
5. Select
,
Brightness
Saturation
. You see your photo next to the menu:
OK
6. Press
or
to increase or decrease the setting. You can
see the changes on your photo.
7. When the photo looks good, press
8. At the next screen, select whether to apply the setting to the
current photo or all photos, then press
9. Repeat steps 3 through 8 to make other adjustments to the
same photo, if necessary. Or repeat steps 1 through 8 to fix
more photos.
10. Press
to select the current photo for printing. Or you
OK
can print all photos or a range of photos (as described on
page 6).
11. Adjust any other settings you want, then press
print your photos.
Storing and Displaying PictureMate Prints
Photos printed on PictureMate photo paper are beautiful,
long-lasting images. Follow these guidelines to make sure they
will look great for generations.
Storing Your Prints
❏ Do not rub the printed side of the photo.
❏ Do not stack photos with the printed sides touching.
Displaying Your Prints
❏ Let prints sit for 24 hours before framing.
❏ To ensure prints will last as long as possible, display them
under glass or in photo albums.
❏ Keep prints out of the sun to help prevent fading.
Storing Unused Paper
Return unused paper to the original package. Store paper flat
to prevent curling, and keep it away from extreme
temperatures, high humidity, and bright light.
, then press
.
Fix Photos
OK
, or
, then press
Sharpness
.
OK
.
OK
Print

Using the Optional Battery

To buy the optional battery, check with your PictureMate
retailer or go to www.MyPictureMate.com.
With a fully charged battery, you can print about 100 photos.

Installing the Battery

1. Make sure PictureMate is turned off.
2. Unplug the AC adapter from PictureMate.
3. Release the latch and remove the battery cover from the
back of the printer.
4. Insert the battery as shown until it clicks into place.
to

Charging the Battery

After you install the battery, you need to charge it by
connecting the AC adapter and plugging in the printer.
8/06
PictureMate Snap (PM 240)
PictureMate Snap (PM 240)
- 11

Advertisement

Table of Contents
loading

Table of Contents