Casio Exilim EX-S1 User Manual page 91

USING THE CAMERA WITH A COMPUTER
5.
Turn off the camera
and remove its
connector cover.
Connector
cover
6.
Making sure that the
camera is turned off,
set it onto the USB
cradle.
• Do not place the
camera onto the USB
cradle while it is turned
on.
7.
Turn on the camera.
• When you turn on the camera, it enters the USB Mode
and automatically transfers the files in camera
memory to the computer.
• While the camera is in the USB Mode, the USB lamp
on the cradle lights green (page 107).
IMPORTANT!
• Be sure to read the applicable information in the user
documentation that comes with your computer before
connecting the USB cradle.
• Do not leave the same image displayed on your com-
puter screen for a long time. Doing so can cause the
image to "burn in" on the screen.
• Take care when connecting the USB cable to the USB
cradle. The USB port and the cable plug are shaped
for proper positioning.
• Plug the USB cable into the ports securely as far as it
will go. Proper operation is not possible if connections
are not correct.
• Be sure to connect the AC adaptor to the USB cradle
to supply power to the camera.
• The optionally available CASIO QC-1U USB cable
cannot be used with this camera.
• Never disconnect the USB cable while the PC is ac-
cessing camera memory (indicated by a flashing USB
lamp). Doing so can cause data to become corrupted.
• You can perform data communication in either the
REC mode or PLAY mode.
89