Operating The Card - Epson Stylus Color 850N User Manual

Using the Ethernet Card
Note:
See the Setup Guide for
information on
connecting the card to
your network.
Using the Ethernet Card
Your EPSON Stylus COLOR 850N includes an EPSON Type
B Ethernet interface card. This card allows you to connect your
printer to a network using 10BASE-T or 10BASE2 cables.
If you have Windows 95, Windows NT 4.0, or Windows 3.1x
with NetWare, Windows NT 4.0 or Windows 95 with
TCP/IP, or Macintosh with AppleTalk, you can configure
the card with the instructions in the Setup Guide. If you are
using other operating systems and configurations, follow the
instructions in this chapter.
This chapter tells you about:

Operating the Card

Configuring for DLC on Windows NT 4.0
Configuring for OS/2
Configuring for UNIX
Using Novell NetWare Modes
Changing the Routing Protocol for NetWare 4.x
Installing EPSON Net! for DOS
Finding Additional Resources for Using TCP/IP
Operating the Card
The Type-B Ethernet interface card has connectors for either an
Ethernet twisted pair (10BASE-T) or an Ethernet thin coaxial
(10BASE2) network connection.
6-2