Epson Stylus Color 850N User Manual page 156

Caution:
If you have dial-up
routers in a NetWare
environment, they may
automatically dial up the
next hop and you may
be charged for the line
connection depending
on the number of hops
you set. To prevent this
and to keep network
traffic to a minimum,
set hops carefully.
Note:
If you install Status
Monitor 2 on additional
workstations, or you are
not using EPSON Net!
you do not have to turn off
background monitoring.
You should limit the
number of systems that
monitor the printer,
however, to prevent
network traffic problems.
9. If you're using NetWare, set the number of hops (0 to 15)
and click .
Next
Number of hops: _______
10. Check the current settings and click
software. When the installer prompts you, insert the second
diskette.
11. When you see the Setup Complete screen, select
click .
Finish
12. Insert Status Monitor 2 for EPSON Stylus COLOR 850,
diskette 1 in your drive.
13. Follow steps 2 to 10, using the same settings you used in
those steps.
14. When the Setup Complete screen appears, select
click .
Finish
15. After you restart your computer, right-click the green
background monitoring icon in your Startup group on the
taskbar. Click
stop monitoring now
background monitoring, which may interfere with EPSON
Net! when you configure the card. (See page 4-7 to turn on
background monitoring.)
A-7
Using Floppy Diskettes
to install the
Next
and
No
and
Yes
. This step turns off