Epson Stylus Color 850N User Manual page 147

Windows NT clients can't print.
Possible cause
The client's permission to
print was deleted or
disabled.
You may need to use a
different network path and
printer port.
NetWare clients cannot print.
Possible cause
The clients may not be
registered, or the Ethernet
card may not be logged in
to the NetWare server.
You cannot monitor NetWare print servers beyond the routers.
Possible cause
The number of hops is set
to 0.
Your printer icon doesn't appear in the Chooser (Macintosh).
Possible cause
EtherTalk is not selected in
the Network Control Panel
or in the AppleTalk Control
Panel.
Solution
Add the CREATOR OWNER status by clicking the
the Printer Permissions dialog box, or set the CREATOR OWNER
Manage Documents
status to
Select a different printer port in the printer's Properties window
and enter the new network path to your printer at the DOS prompt.
Then restart your computer. See your Windows NT documentation
for instructions on changing the printer port and network path.
Solution
Make sure each client is a registered user of the print queue and
print server. Also, make sure the Ethernet card is logged in to the
NetWare server. If you need more information about using
NetWare for printing, see pages 6-22 through 6-24, and your
NetWare documentation.
Solution
Increase the number of hops by changing the setup of Status
Monitor 2 as described on page 4-8.
Solution
For models without Open Transport, make sure EtherTalk is
selected in the Network Control Panel.
For models with Open Transport, select EtherTalk in the AppleTalk
Control Panel and make sure AppleTalk is active in the Chooser.
7-19
Troubleshooting
Add
button on
(the default setting).