Table of Contents
Advertisement
Your camera has a variety of different exposure modes. Before shooting an image,
select the exposure mode that suits the type of subject you are shooting.
1.
In the REC mode, press [SET].
2. Use[A]
and [V] to select the top option in the control panel (Exposure
mode).
3.
Use [,]
and [,]
to select the setting you want and then press [SET].
Use this setting for easy image recording. This is the mode you normally should
use (page 25).
Simply select one of a collection of built-in sample scenes and the camera sets
up automatically
for beautiful images every time (page 66).
In this mode, you select the aperture and other settings
are adjusted accordingly.
Q Press [SET] to open the control panel.
(_) Use [A] and [V] to open the fifth control panel
option from the top (aperture, EV Shift).
(_) Use [A] and [V] to select the aperture setting, and
then use [,] and [1_] to change it.
• The ISO sensitivity, shutter speed and aperture
Aperture value
value on the monitor screen will turn orange when
you half-press the shutter button if the image is over-exposed
or under-
exposed.
• If you are using manual focus (page 89), use [4] and [1_] to focus the image.
33
Snapshot Tutorial
Advertisement
Table of Contents
