Setting The Playtime - Canon POWERSHOT S10 User Manual

Use the F_ and I-_ buttons to move
between images and the _ button to
mark the image.
A number representing the order of the
marked image in the slide show will appear
at the top of the LCD monitor. The image will
automatically play in that order.
• Pressthe _ button to unmark the selected
image.
• Pressthe _ button to switch between the
single image replay and multi image replay
modes (3 images) to select images.
• When in multi image replay mode, you can
deselect all the images at once. Pressthe
SET button, use the _ and I-_ button to
select [OK] and press the SETbutton.
• Pressthe MENU button to close the Select
menu.
Setting the Play Time
You can set the number or seconds that an
image is shown, The available options are 3-10,
15 and 30 seconds and manual,
1 Display the Slide Show menu.
2 Use the I-_-I, I-_q, _ and [_] buttons to
select [Setup]. Press the SET button.
3 Use the [Z] and I-_ buttons to select [Play
Time].
4 Use the _ and _ buttons to select an
option.
• Press the MENU button to closethe Setup menu.
• The actual play time of some images may
vary slightly from the specified play time.