Viewing Image Information; Automatedplayback (Slideshow); Starting A Slide Show - Canon POWERSHOT S10 User Manual

Viewing image information
1 Turn the Mode Dial to the _ position,
Press the DISPLAY button.
• The LCD monitor will cycle to the next
display mode (simple, detail, non display)
each time the DISPLAYbutton is pressed.
The detail display is not available in multi
image replay mode.
• The following information is shown in
the simple display mode.
-File number; Shooting date/time;
Protection status ([_-]).
• The following information is also shown
in the detailed display mode.
-Image mode (_, _, _, I_, I_)
-Macro mode (_)
-Shooting methods (_, I_1,_)
-Flash (!:t, _)
-Exposure compensation (_)
-White balance (_, Q, P!!, D, _)
-Compression (_, El, tq)
-Resolution (BI!,M, _)
-Stitch Assist mode status
AutomatedPlayback (SlideShow)
Starting a Slide Show
Youcan start a slide show with the following
procedures,
All Images: displaysall images on the
OFcard in order
Show I - Show 3: displaysthe images
selected for the respective
slide show in order
1 Turn the Mode Dial to the _ position,
Press the MENU button.
2 Use the _ and _ buttons to select the
[Slide Show[. Press the SET button.