Erasing The Images - Canon POWERSHOT SX500 IS User Manual

Trying the Camera Out
Volume
Play movies.
Press the <_> button to access the
movie control panel, choose [ _ ] (either
press the <4><_> buttons or turn the
<_iii_> dial), and then press the <@>
button again.
Playback now begins, and after the movie
is finished, [_'=_] is displayed.
To adjust the volume, press the <,_><v>
buttons.
To switch to Shooting mode from Playback mode, press the shutter button
halfway.
_ Erasing the Images
You can choose and erase unneeded images one by one. Be careful when
erasing images, because they cannot be recovered.
, Choose an image to erase.
Press the <_><)'> buttons or turn the
<_!_;> dial to choose an image.
Erase the image.
Press the <_> button.
After [Erase?] is displayed, press the
<,_><_ > buttons or turn the <¢_!/_ > dial to
choose [Erase], and then press the <_>
button.
The current image is now erased.
¢ ..............
To cancel erasure, press the <_><_>
buttons or turn the <;_iii!;> dial to choose
[Cancel], and then press the <_>
button.
You can also erase all images at once ([[_137).
3O