Changing The Date And Time - Canon POWERSHOT SX500 IS User Manual

Initial Preparations
Set the home time zone.
Press the <4><_> buttons or turn the
<_'_i_ > dial to choose your home time
zone.
.......................... Finish the setup process.
Press the <@> button to complete the
setting. The setting screen is no longer
displayed.
To turn off the camera, press the power
button.
(_ Unless you set the date, time, and home time zone, the [Date/
Time] screen will be displayed each time you turn the camera on.
Specify the correct information.
To set daylight saving time (1 hour ahead), choose [_T] in step 2 and then
choose [_,o_]by pressing the <._><v> buttons or turning the <;i_i i;_>dial. ...........
@ Changing the Date and Time
Adjust the date and time as follows.
:_ Access the camera menu.
Press the <MENU> button.
23