Printing From Start To Finish; Printing With Windows; Loading Paper - Epson 777 Printer Basics Manual

Printing from Start to Finish

Here's what to do to print a basic document—such as a newsletter or photograph—
from loading the paper to selecting print settings to controlling the print job. Follow
the instructions in these sections:
"Printing with Windows" below
"Printing on a Macintosh" on page 9
If you're already familiar with EPSON ink jet printing, you can skip ahead
to these sections:
"Using PhotoEnhance, Custom, and Advanced Settings" on page 13
"Printing on Envelopes" on page 15
"Using Special Papers" on page 16
"Selecting the Correct Media Type" on page 17

Printing with Windows

This section describes the basic steps for printing with Windows.
(To print on a Macintosh, see page 9.)

Loading Paper

Make sure your printer and computer
are turned on.
Place your paper against the right edge
of the sheet feeder and slide the left
edge guide against the paper. (Don't
push the paper deeper into the feeder.)
Follow these guidelines when loading
paper:
Load the printable side face up. It's usually whiter or brighter than the other side.
Load letterhead or preprinted paper into the printer top edge first.
Don't load paper above the arrow on the left edge guide.
Load paper only
up to this arrow
Slide paper
against the
right edge
5