Requirements And Notices; Windows System Requirements - Epson 777 Printer Basics Manual

Printer basics

Hide thumbs Also See for 777:

Table of Contents

Requirements and Notices

This chapter includes system requirements, safety instructions, legal notices, and other

important information.

To use your printer and its software, your system should have:

An IBM

compatible PC with at least a 486/66 MHz (for Windows 98), Pentium

133 MHz (for Windows 2000), or 486/25 MHz (for Windows 95 or Windows NT

4.0) processor (Pentium processor recommended)

Microsoft Windows 95, Windows 98, Windows 2000, or Windows NT 4.0

At least 16MB (for Windows 95, 98, or Windows NT 4.0) or 32MB (for Windows

2000) of RAM (32MB for Windows 95 or Windows 98, or 64MB for Windows 2000 or

Windows NT 4.0 recommended)

At least 50MB of free hard disk space (100MB recommended)

VGA or better display adapter and monitor

Double-speed (2x) CD-ROM drive (quad-speed [4x] or faster recommended) or DVD

drive for installing the printer software

For parallel connection: a high-speed, bidirectional, IEEE-1284 compliant parallel cable

(6 to 10 feet long) with a D-SUB, 25-pin, male connector for your computer and a

36-pin, Centronics

For USB connection: a computer running Windows 98 or Windows 2000 with a

Windows compliant USB port and a shielded USB "AB" cable from Series A (computer)

to Series B (printer), up to 6.5 ft. (2 meters) long.

Using an improperly shielded USB cable—especially a cable more than 6.5 ft.

(2 meters) long—may cause the printer to malfunction.

compatible connector for the printer

Table of Contents