Cleaning The Printer - Epson 777 Printer Basics Manual

Printer basics
Hide thumbs Also See for 777:
Table of Contents

Advertisement

5. Follow the instructions on the screen to
print a test page. You see this window:
6. On the printed page, select the pattern
that shows the two vertical lines most
precisely printed on top of each other.
Select one pattern each for rows 1, 2,
and 3. Then enter the number of the
best pattern for each row in the
corresponding boxes on the screen.
7. Click
Realignment
page. Make sure the pattern numbered 8
in each row is the best aligned. If not,
repeat steps 6 and 7.
8. When you're finished, click

Cleaning the Printer

To keep your printer working at its best, you should clean it several times a year.
Follow these steps:
1. Turn off the printer, unplug the power cord, and disconnect the printer cable.
2. Remove all the paper from the sheet feeder.
3. Clean the exterior of the printer with a soft, damp cloth.
4. Clean ink out of the printer's interior with a soft, damp cloth.
Don't touch the gears inside the printer.
Never use a hard or abrasive brush, or alcohol or thinner for cleaning;
they can damage the printer components and case.
Don't get water on the printer components and don't spray lubricants
or oils inside the printer.
Don't use any cleaning sheets included with special media; they may
jam inside the printer.
to print another test
.
Finish
25

Advertisement

Table of Contents
loading

Table of Contents