Download Print this page

Canon PowerShot G1 X User Manual page 99

Hide thumbs Also See for PowerShot G1 X:

Advertisement

If an error message
is displayed,
respond
as follows.
No memory
card
The memory card may be inserted facing the wrong way. Reinsert the memory card
facing the correct way (p. 16).
Memory card locked
The write-protect tab of the SD/SDHC/SDXC memory card or Eye-Fi card is set to the
locked position. Switch the write-protect tab to the unlocked position (p. 15).
Cannot
record!
Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way (p. 16).
Memory card error
(p. !72)
If the same error message is displayed even when you have inserted a formatted
memory card facing the correct way, contact a Canon Customer Support Help Desk
(p. 16).
insufficient
space on card
There is not enough free space on the memory card to shoot (pp. 43, 67, 91,123) or
edit images (pp. 160 - 164). Either erase unneeded images (pp. 152) or insert a
memory card with enough free space (see "Specifications" in the Getting Started guide).
Change the battery
pack. (p. 15)
No Image.
The memory card does not contain any images that can be displayed.
Protected!
(p. 148)
Unidentified
image/Incompatible
JPEG/Image
too large./Cannot
play back
AVI/RAW
Unsupported or corrupt images cannot be displayed.
It may not be possible to display images that were edited or renamed on a computer,
or images shot with another camera.
Cannot
magnify!/Cannot
play back this content
in Smart Shuffle/Cannot
rotatetCannot
modify image/Cannot
register
this image!/Cannot
modify/
Cannot
assign
to category/Unselectable
image.
The following functions may be unavailable for images that were renamed or already
edited on a computer, or images shot with another camera. Note that starred (*)
functions are not available for movies.
Magnify* (p. 145), Smart Shuffle* (p. 147), Categorize (p. 157), Rotate (p. 155), Edit*
(pp. 160 - 164), Assign as Start-up Image* (p. 171), and Print Order* (p. 208).
Grouped images cannot be processed (p. 85).
invalid selection range
When specifying a range for image selection (pp. 150, 153, 159, 210), yell attempted
to choose an initial image that was after the final image, or vice-versa.
220

Advertisement

loading