Canon PowerShot G1 X User Manual page 43

Automatically corrects images affected by red-eye. You can save the
corrected image as a separate file.
Choose [Red=Eye Correction].
Press the
MENU
button, and then choose
[Red-Eye Correction] on the [] tab (p. 4I).
Choose an image.
Press the _ buttons or turn the _ dial to
choose an image.
Correct the image.
Press the @ button.
Red-eye detected by the camera is now
corrected, and frames are displayed around
corrected image areas.
Enlarge or reduce images as needed. Follow
the steps in "Magnifying Images" (p. 145).
Save as a new image and review.
Press the Av 4 F buttons or turn the _ dial
to choose [New File], and then press the @
button.
The image is now saved as a new file.
Follow step 5 on p. I60.
Some images may not be corrected accurately.
To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be erased.
Protected images cannot be overwritten.
RAW images cannot be edited this way.
Red-eye correction can be applied to JPEG images shot in _, but
the original image cannot be overwritten.
164