Table of Contents
Advertisement
I109
Changing
the
Save
Method
for the
Original
Image
When shooting still images in the Color Accent or Color Swap mode,
you can set whether or not to save the original image as well as the
transformed
one.
Select
[Save
Original].
1. Press the O
button.
2. In the []
menu, use the ÷ or _1,
button to select [Save Original].
2
Accept
the
setting,
1. Use the <- or ._ button to select
[On] or [Off].
2. Press the O
button.
[_]
When [Save Original] is Set to [On]
- Only the transformed
image displays in the LCD monitor
while shooting in the Color Accent or Color Swap mode.
- The transformed
image is reviewed in the LCD monitor
after shooting in the Color Accent or Color Swap mode.
If you erase the image at this point, the original image is
erased along with the transformed
image. Exercise
adequate caution before deleting a file.
- The images are numbered consecutively.
The original
images are assigned the lower number and the
transformed
color accent or color swap images the next
number.
- Since two images are recorded with each shot, the number
of shots remaining is approximately
half the number
displayed when this function is set to [Off].
Hide quick links:
Advertisement
Table of Contents
