Table of Contents
Advertisement
1001
_]
• Use the LCD monitor to confirm that the image was recorded
at the desired brightness.
• Please note that camera shake becomes a factor at low
shutter speeds. Shoot with the camera attached to a tripod.
• Use of the flash may result in an over-exposed
image. If this
occurs, shoot with the flash set to [_J.
l Adjusting
the Tone
(White
Balance)
_
:'+.,*=.;.=l,,]_mt,,.,1,[ez.m,t,m_m_m+._
)) p. 222
Normally, the []
(Auto) white balance setting selects an optimal white
balance. When the []
setting cannot produce natural looking colors,
change the white balance using a setting appropriate for the light
source.
[]
Auto
Settings are automatically set by the camera.
[]
Day Light
For recording outdoors on a bright day.
For recording under overcast, shady or twilight
[]
Cloudy
skies.
For recording under tungsten and bulb-type 3-
[]
Tungsten
wavelength fluorescent lighting.
For recording under warm-white, cool-white or
[]
Fluorescent
warm-white (3-wavelength) fluorescent lighting.
For recording under daylight fluorescent, or daylight
[]
Fluorescent H
fluorescent-type 3-wavelength fluorescentlighting.
Adjusts the optimal white balance for the shooting
conditions using the white balance data retained in
[]
Custom
the camera from a white-colored object, such as a
white paper or cloth.
Hide quick links:
Advertisement
Table of Contents
