Advertisement
Using
an Eye-Fi
Card
transfer.
Choosing o_ mode will interrupt the Eye-Fi connection. Although the Eye-Fi
connection wilt be restored after you choose another shooting mode or enter
Playback mode, the camera may transfer any movies made in ,_ mode again.
_
Checking
Connection
information
Check the access
point SSID used by the Eye-Fi
card or the connection
status,
as needed.
Press the
MENU
button,
choose
[Eye-Fi
Settings]
on the _I' tab, and then press the
@
button.
Choose
[Connection
info], and then press the
@
button.
The connection
information
screen is
displayed.
_Disabling
Eye-Fi
Transfer
Configure
the setting
as follows
to disable
Eye-Fi transfer
by the card, if
necessary.
Choose
[Disable]
in [Eye=Fi trans.].
Press the
MENU
button,
choose
[Eye-Fi
Settings]
on the _1' tab, and then press the
@
button.
Choose
[Eye-Fi
trans.],
and then choose
[Disable].
(_
[Eye-Fi Settings]
is not shown unless
an Eye-Fi card is in the camera
with its write-protect
tab in the unlocked
position.
For this reason,
you
cannot change
settings
for an inserted
Eye-Fi card if the write-protect
tab is in the locked
position.
191
Advertisement
