Canon VIXIA HF200 Instruction Manual page 161

Print head not installed
- No print head is installed in the printer or the print head is defective.
Print order error
- Youattempted to set more than 998 photos in the print order.
Printer cover open
- Close the printer coversecurely.
Printer error
- A malfunction hasoccurred that may require repairs. (CanonPIXMAprinters: the printer's
green power lamp and orange error lamp flash alternately.)
- Disconnectthe USBcable and turn off the printer. Unplugthe printer's power cord from the
power outlet and contact the appropriate customer support center or service center.
Printer in use
- The printer is in use. Checkthe printer status.
Printing error
- Cancelprinting, disconnect the USBcable and turn off the printer. After a while, turn the
printer back on and reconnect the USBcable. Check the printer status.
- Whenyou are printing using the _ _ button, check the print settings.
Readjust trim settings
- The trimming settings for this photo were lost as a result of changesin the paper-related set-
tings.
(_) NOTES
About CanonPIXMA/SELPHYDSPrinters: If the printer's error indicator
flashes or an error message appears on the printer's operation panel, refer
to the printer's instruction manual.
• If you cannot solve the problem even after consulting this list and the
printer's instruction manual, contact the closest Canon Service Center
(refer to the list included with the printer).
Additional information ," 161