Canon VIXIA HF200 Instruction Manual page 140

[Phete Review Time]-" Selects the time to display a photo after it has been
recorded.
• The review time can only be set when the drive mode is set to [E3 Sin-
gle].
• If you press Ii_i_Pi/ while reviewing a photo it will continue to be dis-
played indefinitely. Press P_H6TO/halfway or _ to return to the nor-
mal display.
/ _ Playback Setup
[Rec Media [Built-in Men].], [Mem. Card] • - 42
for Photos]
[Photo Capture from [r-I Single Photo], [_ Photo Sequence] • - t03
Video]
[PhoioCapiuie [_iW Supei Fine]i [_iW Fine]i [_ Noimai] ' Z i 03
Quality]
[Data Code] [[] Date], [Q Time], [_Q Bate and Time[, •
[DR Camera Data]
[USB Connection [=== DVD Burner], [_ Computer/Printer], • • -
Type] [,_ Connect and Set]
[Add Recoidings io [All Scenes]: [Remaining Scenes]: [Piayiisi] • : i 22
[mi_ _Print] - • 115 :
[Data Code]: Displays the date and/or time when the scene was recorded.
[_ Camera Data]: Displays the aperture (f-stop) and shutter speed used
when recording the scene.
[USB Conneetien Type]: Select the connection protocol to use when con-
necting the camcorder to an external device using the supplied USB
cable.
[_ DVD Burner]: To connect exclusively to the optional DW-100 DVD
Burner.
[Eu. Computer/Printer]: To connect to a computer, printer or similar USB
peripheral.
[_ Connect and Set]: To make the selection from a screen that appears
at the time of the connection to the external device.
140 • Additional information