Canon VIXIA HF200 Instruction Manual page 143

I_ System Setup 2
[Wireless Remote [_ On], [_ Off I_l_] • • • • - :
Control]
[Notification Sounds] [,=)))High Volume] • • • •
[1_ i ) LowVolume] [_r_ Off]
[PowerSavngMode] [_ On] [_ Off] • • • •-
[QuickStart] [r_'J Off], [_ 10 rain], • • ---
[!:_t 20 min], [_ 30 min]
[Ciniii ioi HDM ]i i_ Oni:[Q O_ ' *' IIZ
_ [Built-inMem.], •
•
• 2 • 43
[Initialize[_/_] [Mem.Card]
[QuickInitialization],
[Initialize_] [Complete Initialization]
[PhotoNumbering] [_ Reset],[l_ Continuous] • • • • -
[Firmware] - - - - • -
1 Option not availablewhen the camcorder is connected to an HDTV usingan HDMI
cable.
2 Option availableonly from the original movies index screen.
[Wireless Remete £entre|]-" Allows the camcorder to be operated with the
wireless controller.
[SeUfieatien Seunds]: A beep will accompany some operations like turn-
ing on the camcorder, the self-timer countdown, etc.
[Pewer Saving Mede]-" In order to save power when the camcorder is
powered by a battery pack, it will automatically shut off if left without any
operation for 5 minutes.
• Approximately 30 seconds before the camcorder shuts off, [Auto power
off] will appear.
• In standby mode, the camcorder will shut off after the time selected for
the [Quick Start] setting.
[QuBekStart]-" Select whether to activate the Quick Start function when
you close the LCD panel in a recording mode (C[3 48) and the length of
time after which the camcorder will end the standby mode and shut off
automatically.
Additional Information * 143