Reusing The Packaging - Epson 7400 Unpacking And Setup Manual

Attaching the Paper Basket
1. Insert the basket hooks into the slots on the
rotary boards attached to the bottom
horizontal strut. The top ends of the basket
hooks should be facing downward.
2. Snap the rear paper basket joints onto the tips
of the basket hooks at the rear of the Stand.
Make sure the joints are positioned as shown.
16
3. Rotate the front paper basket joints to enfold
the bar which is not attached to the fabric as
shown (N). Then, snap the front paper basket
joints onto the tips of the basket hooks at the
front of the Stand. Make sure the joints are
positioned as shown (O).
N
O
4. Set 2 paper guides at the bottom of the printer
as shown below, when you feed the paper
forward or backward.

Reusing the Packaging

If you need to transport your printer a long
distance, the printer should be repacked using the
original boxes and packing materials. Contact
your dealer for assistance.