Using The Stand - Epson 7400 Unpacking And Setup Manual

3. Lift the box up and away from the printer.
Remove all the items from the hollow (A and
B) on the rear side of the printer.
Note:
The ink cartridges included with your printer are
primarily for initial setup.
4. Remove the polystyrene foam stoppers under
the printer.
5. Remove the protective materials:
❏ from the front cover (tape).
❏ from the ink compartment cover (tape).
❏ from the maintenance tank (tape).
❏ from the side of the print head
compartment (screw and metal plate
inside the front cover).
Note:
Do not re-install the screw. Store it separately to
avoid losing it.

Using the Stand

Checking the contents of the package
Before assembling the Stand, check the contents of
the package to make sure that all of the items
shown are included, and are not damaged.
Parts:
A
C
E
A: Right base (1) and Left base (1)
B: Right leg (1) and Left leg (1)
C: Bottom horizontal strut (1)
D: Top horizontal strut (1)
E: Basket hooks (4)
F: Paper basket (1)
Tool:
G
Hex wrench (2)
G:
B
D
F
13