Table of Contents
Advertisement
For information on opening and using the software, see "Printing
Your First Page for Windows" on page 28. See also "Using the
Printer Software for Windows" in the online Reference Guide.
Installing in Windows 3.1
Follow these steps to install the software in Windows 3.1:
1. Make sure Windows 3.1 is running and the Program Manager
window is open.
2. Insert the printer software CD shipped with your printer in
the CD-ROM drive. (If you use the floppy disk version, insert
it in a disk drive.)
3. Choose Run from the File menu. You see the Run dialog box.
In the Command Line box, type D:SETUP and click OK. If the
CD-ROM drive has a drive letter other than "D" or if you are
using the floppy disk version, substitute the appropriate
letter.
Note:
If you wish to make a floppy disk version of the printer software
included on your CD-ROM, type EPSETUP instead of SETUP. In
the dialog box that appears, click the Driver disk creation utility
button and follow the on-screen instructions.
20
Advertisement
Table of Contents
