Canon POWERSHOT A480 User Manual page 83

In [] mode, you can set the exposure or change it in 1/3 steps within a range
of _+2.
Focus.
Press the shutter button halfway to focus.
.... Lock the exposure.
Press the .,L button to lock the exposure.
The exposure shift bar appears.
Press the A button again to release the lock.
Change the exposure.
While looking at the screen, press the 4
buttons to adjust the brightness.
shoot.
The following functions can be used in the same way as for still images.
Zooming in More C_ose_y on Subjects (Digita_ Zoom) (p. 54)
You can use the digital zoom, but the optical zoom cannot be used.
If you want to shoot at the maximum zoom factor, you should adjust the
optical zoom to the maximum before shooting.
The sound of the zoom will be recorded.
¢._ Using the Serf-Timer (p. 57)
Shooting Close-ups (Macro) (p. 61)
Shooting Far Away Subjects (Infinity) (p. 63)
Adjusting the White Balance (p. 68)
Changing the Tone of an Image (My Colors) (p. 69)
Shooting Using a TV Monitor (p. 70)
b__ Shooting Using the Two Second Serf-Timer (p. 70)
Turning off the AF Assist Beam (p. 103)
Displaying the Overlay (p. 104)
[3:2 Guide] is not available.
83