Toyota 2005 CAMRY Wiring Diagram page 185

[A] : System Title
[B] : Indicates the wiring color.
Wire colors are indicated by an alphabetical code.
B = Black W = White
L = Blue V = Violet
R = Red G = Green
P = Pink Y = Yellow
O = Orange
The first letter indicates the basic wire color and the
second letter indicates the color of the stripe.
Example: L – Y
L Y
(Blue) (Yellow)
[C] : The position of the parts is the same as shown in
the wiring diagram and wire routing.
[D] : Indicates the pin number of the connector.
The numbering system is different for female
and male connectors.
Example : Numbered in order
from upper left to
lower right
Female
The numbering system for the overall wiring diagram is
the same as above
[E] : Indicates a Relay Block. No shading is used and
only the Relay Block No. is shown to distinguish
it from the J/B.
Example : Indicates Relay Block No.1
BR = Brown
SB = Sky Blue
LG = Light Green
GR = Gray
Numbered in order
from upper right to
lower left
Male
[F] : Junction Block (The number in the circle is the J/B No.
and the connector code is shown beside it).
Junction Blocks are shaded to clearly separate them
from other parts.
Example:
3C indicates that
it is inside
Junction Block
No.3
[G] : Indicates related system.
[H] : Indicates the wiring harness and wiring harness
connector. The wiring harness with male
terminal is shown with arrows (
Outside numerals are pin numbers.
Female
[I] : ( ) is used to indicate different wiring and
connector, etc. when the vehicle model, engine type,
or specification is different.
[J] : Indicates a shielded cable.
[K] : Indicates and located on ground point.
[L] : The same code occuring on the next page indicates
that the wire harness is continuous.
).
Male ( )