Toshiba Satellite R10 User Manual page 196

3) Select either Monitor (CRT display) or Television, then select Apply
2. Some reproduced DVD picture may not be displayed when the display
of the computer and a CRT display are used at the same. Reduce the
resolution, use the display of the computer only, use the CRT display
only or set display device in the multi-monitor, then play DVD.
Please refer to
Devices or the application guide for the setting of each display device.
3. When playback DVD title with Multiple Monitors mode, there are some
case that DVD Overlay is not shown. In this case, please try to playback
WinDVD with decreasing resolution, refresh rate or color depth after exit
WinDVD player.
4. There are some case that you can select non-support mode with LCD/
CRT Dual Clone mode or MultiMonitor mode. In this case, please try to
decrease CRT resolution, refresh rate or color depth.
Satellite R10
button, because the Primary Device is fixed into Notebook (the
display of the computer).
Intel(R) 82852/82855 GM/GME Graphics Controller Prope...(1)
External monitor
Display Controller and Modes
in this manual of Chapter8 Optional
B-8