Maintenance Menu - Oki 4600 User Manual

SYSTEM ADJUSTMENT MENU
Item
PCL TRAY 2 ID
PLACE PG
HEX DUMP

Maintenance menu

This menu provides access to various printer maintenance
functions.
MAINTENANCE MENU
Item
EEPROM RESET
DRUM COUNT RESET
POWER SAVE
Default
1-
5*
-59
CENTER*
LEFT
EXECUTE
Default
EXECUTE
EXECUTE
ENABLE*
DISABLE
B4400/4500/4600 User's Guide
Remarks
Sets the # to specify Tray 2
for the media source
command (ESC & l # H) in
PCL5e emulation.
Displays only when Tray 2
is installed.
Sets the paper position.
This is the reference base
used in printing paper
narrower than Edit Size
from the manual feeder
without specifying Paper
Size. The paper's base
point in LANDSCAPE is not
the point set in the MENU,
rather the lower left
position to which a print
image has been
horizontally shifted.
Prints in hexadecimal
dump. Turn OFF the power
to end hexadecimal dump
printing.
Remarks
Reset EEPROM.
Reset Drum Count.
Sets Power Save Mode.
When enabled, time to
change to Power Save
mode is changed in POWER
SAVE DELAY TIME in the
SYS CONF MENU.
44