B4400 Status Monitor - Oki 4600 User Manual

• Resuming data processing.
The secondary functions of the OnLine button are activated
after turning the printer off line, then pressing and holding the
switch for at least two seconds before releasing. The
secondary functions are as follows:
• Printing the demo and menu pages.
Demo and menu pages can also be printed using
NOTE:
the printer Status Monitor
• Printing any data held in the buffer after printing has
been cancelled.
The other functions of the OnLine button are activated after
turning the printer off line then pressing and holding the switch
for at least five seconds before releasing. The other functions
are as follows:
• Printing a cleaning page.
NOTE: A Cleaning page can also be printed using the printer
Status Monitor.
• Resetting the printer and clearing the buffer after
printing has been cancelled.
NOTE: To reset the printer to the factory default settings,
press the OnLine button and hold it down while the printer is
turned on. The LED indicators blink when the printer has reset
to the default settings.

B4400 Status Monitor

After installing the printer driver software, the Status Monitor
is then installed to indicate what is happening to the printer
when it is being used. (See the chapter entitled "Printer
Drivers.") This Status Monitor is also used to control and
change the various printer settings.
Using the Printer Status Monitor
Viewing the status of the printer, and viewing or changing the
printer settings are carried out as follows:
B4400/4500/4600 User's Guide
26