Lan; Wireless Lan; Recovery Discs - Toshiba Satellite L300 Series User Manual

LAN

Problem
Cannot access LAN
Wake-up on LAN

Wireless LAN

If the following procedures do not restore LAN access, consult your LAN
administrator. For more information on wireless communication, refer to
Chapter 4,
Problem
Cannot access Wireless
LAN

Recovery discs

Problem
The following message
appears when executing
Recovery Disc Creator.
"The Recovery Disc
Creator can not be
launched because there
is no recovery partition."
User's Manual
Procedure
Check for a firm cable connection between the
LAN jack and the LAN HUB.
Make sure the AC adaptor is connected. The
does not work Wake-up on LAN function
consumes power even when the system is off.
If problems persist, consult your LAN
administrator.
Operating Basics.
Procedure
Make sure the computer's wireless
communication switch is set to on.
If problems persist, consult your LAN
administrator.
Procedure
You will see this message if you have previously
chosen to remove the partition and are trying to
create "Recovery Media". When there is no
recovery partition, the Recovery Disc Creator
cannot make Recovery Media.
However, if you have already created a
"Recovery Media", you can use it to restore the
recovery partition.
Simply follow the instructions in "Restoring the
preinstall software from your creating Recovery
Media" section in this manual. You will be
directed to select "Restore Original Factory
Image" from the drop-down menu. If you have not
created "Recovery Media", please contact
TOSHIBA support for assistance.
Troubleshooting
9-14