Turning on the overlays
The numeric keypad overlay can be used for numeric data input or cursor
and page control.
Arrow mode
To turn on the Arrow mode, press FN + F10. The Arrow mode indicator
lights. Now try cursor and page control using the keys shown in figure 5-1.
Press FN + F10 again to turn off the overlay.
Numeric mode
To turn on the Numeric mode, press FN + F11. The Numeric mode indicator
lights. Now try numeric data entry using the keys in figure 5-1. Press FN +
F11 again to turn off the overlay.
Temporarily using normal keyboard (overlay on)
While using the overlay, you can temporarily access the normal keyboard
functions without turning off the overlay :
1. Hold FN and press any other key. All keys will operate as if the over-
2. Type uppercase characters by holding FN + SHIFT and pressing a
3. Release FN to continue using the overlay.
User's Manual
Figure 5-1 The numeric keypad overlay
lay were off.
character key.
The Keyboard
5-6