Appendix D: Installing The Label Support Rack - Microcom 410 Operator's Manual

Chapter 5 Printer Commands
))))))))))))))))))))))))))))))))))))))))))))

APPENDIX D: INSTALLING THE LABEL SUPPORT RACK

To install the optional label support rack, insert the lower left tab of the rack into the hole on the
lower left side of the printer. Press inward on the opposite side and slide the rack downward until
the tab drops into the hole on the right side. Both lower tabs should be inserted.
Press inward on the upper portion of the rack and insert the upper tabs into the two upper holes.
When reloading paper, depress upper two tabs and swing rack downward.
))))))))))))))))))))))))))))))))))))))))))))
410 Operators Manual 75