Regulatory Information; Electrical Safety - HP rp7400 Hardware Manual

Regulatory Information

For your protection, this product has been tested for conformance to
various national and international regulations and standards. The scope
of this regulatory testing includes electrical and mechanical safety,
electromagnetic emissions, immunity, acoustics and hazardous
materials.
When required, approvals are obtained from third party test agencies.
Approval marks appear on the product label. In addition, various
regulatory bodies require some information under the headings listed in
this section.

Electrical Safety

This product has not been evaluated for connection to an "IT" power
system (AC distribution system having no direct connection to earth
according to IEC 950).
Locate the AC outlet near the computer! The AC power cords are this
product's main AC disconnect devices and must be easily accessible at all
times.
Electrostatic Discharge (ESD) Precautions
When handling any electronic component or assembly (such as, a PCI
card or Memory SIMM), you must observe the following antistatic
precautions to prevent damage. An ESD kit (HP P/N A3024-80004) is
available (or supplied with Memory additions). This kit contains one
wrist strap, one conductive sheet, and one anti-static foam pad.
• Always wear a grounded wrist strap when working around the
system, and when handling printed circuit boards.
• Treat all assemblies, components and interface connections as
static-sensitive.
• Avoid working in carpeted areas, and keep body movement to a
minimum while removing or installing boards, to minimize buildup of
static charge.
Battery Notice
This product contains a Lithium battery.
This battery is not to be removed or replaced by the user. If the battery
4