Replacing The Lamp - Epson PowerLite 5000XB User Manual
Epson user manual powerlite 7000xb, 5000xb
Hide thumbs
Also See for PowerLite 5000XB:
- Product information (3 pages) ,
- User manual (1 page) ,
- Specification (1 page)
Table of Contents
Advertisement
Replacing the Lamp
84
5 • Maintenance
4. The filter is attached to the inside of the filter cover. It is
recommended that you use a small vacuum cleaner designed for
computers and other office equipment to clean the filter. If you
don't have one, use a dry, lint-free cloth.
If the dirt is difficult to remove or if the filter is torn, replace it.
Contact your dealer or call EPSON Accessories at (800) 873-7766
in the United States and Canada to obtain a new one. Request part
number 1032043.
The projector lamp typically lasts for about 2000 hours of use. It is
time to replace the lamp when:
The projected image gets darker or starts to deteriorate.
The projection lamp indicator (orange and red, flashing
alternately) is red.
Contact your dealer or call EPSON Accessories at (800) 873-7766 in
the United States and Canada for a replacement lamp.
Warning: Let the lamp cool before replacing it. Also, do not touch the
glass portion of the lamp assembly. Touching the glass portion of the lamp
will result in premature lamp failure.
1. Turn off the projector and unplug the power cable.
2. Turn the projector over so you can access the lamp cover.
Advertisement
Table of Contents
