SCREEN menu
With the SCREEN menu, the items shown in the table
below can be performed.
Choose an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table.
Item
Using the buttons ▲/▼ switches the OSD (On Screen Display)
language.
ENGLISH FRANÇAIS DEUTSCH ESPAÑOL ITALIANO
LANGUAGE
Using the buttons ◄/►/▲/▼ adjusts the menu position.
MENU POSITION
To quit the operation, press the MENU button or keep no operation
for 10 seconds.
Using the buttons ▲/▼ switches the brightness level of the OSD (On
Screen Display).
OSD BRIGHT.
Using the buttons ▲/▼ switches the mode for the blank screen.
The blank screen is a screen for the temporarily blanking feature.
(27) It is displayed by pressing the BLANK button.
MyScreen is a screen you can register as a desired screen. The
BLANK
ORIGINAL screen is the existing standard screen. BLUE, WHITE
and BLACK are non-patterned (plain) screens in each color.
• To avoid remaining as an afterimage, the MyScreen and the
ORIGINAL screens will change to the BLACK screen after several
minutes.
• For the MyScreen, please refer to the MyScreen item. ( 42)
NORSK NEDERLANDS PORTUGUÊS
BRIGHT DARK
MyScreen ORIGINAL BLUE WHITE BLACK
Multifunctional settings
MENU [ RGB ]
PICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
EASY MENU
Description
SVENSKA
SUOMI POLSKI TÜRKÇE
:SELECT
LANGUAGE
ENGLISH
MENU POSITION
OSD BRIGHT
5
BLANK
BLACK
START UP
ORIGINAL
MyScreen
EXECUTE
MyScreen Lock
TURN OFF
MESSAGE
TURN ON
41