Slide Show Mode - Hitachi CPX809 - XGA LCD Projector Network Manual

5. PC-LESS Presentation

5.4 Slide Show Mode

You can play the Slide show with the projector menu.
Select the SLIDE SHOW on PC-LESS PRESENTATION
menu and press the ENTER / ► button on the remote
control or ► button on Keypad. Then Slide show will start.
You can also play the Slide show by clicking [SLIDE
SHOW] button in the Web Remote Control.
The Slide Show Mode (Fig. 5.4) displays a full screen image and switches the images
at intervals set in the Display time. The Display time can be set by the Playlist (116)
and menu. (111)
The following operations can be accessible while the Slide show is displayed.
Button operation
The keypad
The remote
on the
control
projector
ENTER INPUT
MENU -
* These operations are not accessible while the projector OSD menu is displayed.
NOTE
• It is impossible to change the input port by the INPUT button if the
THUMBNAIL, SLIDE SHOW, or DIRECTORY is displayed.
• Display the projector OSD menu before changing the input port .
• Images can be displayed when it is recorded in the playlist.
• Image can not be displayed in the thumbnail if it is not recorded in the playlist. (116)
• When the SLIDE SHOW mode is set to ONE TIME, the last slide of the
presentation will be held on screen till the ENTER button on the remote control
or Web Remote Control, or INPUT button on the projector is pushed.
110
Fig. 5.4 Slide Show Mode
Web Remote
in web browser
software.
ENTER
MENU
Functions
Displays thumbnail.
Displays PC-LESS PRESENTATION
menu.