Table of Contents
Advertisement
1. Main functions
1.2 Quick connection to your network
The "Live Viewer 3" brings you very quick and simple connection to your network.
The "Live Viewer 3" prepares some options for you to match your requirement.
1) Quick connection by the Passcode
The Passcode is a code that includes SSID and IP address and other information
that are required for the network connection. The Passcode is given on screen by
the projector, and then all you need to do is to input the code to the "Live Viewer 3"
in your PC. (26)
2) Connection by the profile for the network
You can set the information to connect the projector to your network as a profile
data in the "Live Viewer 3" in your PC. After that, you just select the profile data on
the "Live Viewer 3" to connect the projector to your network.
3) Connection by the history record for the network
Once you connect the projector to your network with the "Live Viewer 3", the
"Live Viewer 3" stores the history. You just select a history record to connect the
projector to your network.
6
Fig.1.2 PASSCODE on the projector screen
Advertisement
Table of Contents
