Raid Arrays - Biostar TZ77XE4 Setup Manual

Enable RAID / AHCI Driver when installing Windows 7/Vista
1. Before you start Windows installation, copy the proper files for the Windows
version to any USB storage.
Windows 7 32
SATA1-U/
SATA1-L/
SATA2-U/
x:\Driver\Chipset\
SATA2-L/
Intel\SATA\7\F6flpy
SATA3-U/
32\Driver\
SATA3-L/
eSATA
AHCI/RAID
Driver Path
SATA4 PM1
-U/SATA4 PM0 x:\Driver\\SATA\
-L
Asmedia\F6\Win7\
AHCI Driver Driver\x86\
Path
2. Follow Window 7 / Vista indication to load the driver in the installation process.
4.2 R A
AID RRAYS
CONNECTOR
SATA2-U/SATA2-L/SATA3-U/
SATA3-L/eSATA
SATA1-U/SATA1-L
RAID supports the following types of RAID arrays:
RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write
times for many applications.
RAID 1: RAID 1 defines techniques for mirroring data.
RAID 10: RAID 10 combines the techniques used in RAID 0 and RAID 1.
RAID 5: RAID 5 provides fault tolerance and better utilization of disk capacity.
Windows 7 64 Windows Vista 32
x:\Driver\Chipset\ x:\Driver\Chipset\
Intel\SATA\7\F6flpy Intel\SATA\7\F6flpy
64\Driver\ 32\Driver\
x:\Driver\\SATA\ x:\Driver\SATA\
Asmedia\F6\Win7\ Asmedia\F6\V ista\
Driver\x64 Driver\x86\
BY CHIP SPEED
Intel Z77 3 Gb/s. RAID 0 / 1 / 5 / 10
Intel Z77 6 Gb/s. RAID 0 / 1 / 5 / 10
TZ7 7 X E4
Windows Vista 64
x:\Driver\Chipset\
Intel\SATA\7\F6flpy
64\Driver\
x:\Driver\SATA\
Asmedia\F6\V ista\
Driver\x64\
Support
21