Technical Specifications - Tannoy System 600 User Manual

TECHNICAL SPECIFICATIONS

Loudspeaker
Frequency response (1)
Recommended amplifier power
Power handling
Nominal Impedance
Sensitivity (3)
Distortion
Dispersion (@ -6dB)
Crossover frequency
Cabinet
Drive unit
Low frequency design
Cabinet construction
Cabinet finish
Cabinet dimensions (HxWxD)
Cabinet weight
Shipping dimensions (HxWxD)
Shipping weight
NOTES : (1) +/- 3 dB , measured at 1m in an anechoic chamber.
(2) Long term power handling capacity as defined in EIA standard RS426A.
(3) Averaged over specified bandwidth for half-space environment. For anechoic conditions the figure is to be
decreased by 3 dB.
Tannoy operate a policy of continuous research and development. The introduction of new materials or manufacturing
methods will always equal or exceed the published specifications which Tannoy reserve the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
52 Hz - 20 kHz
50 to 150 W rms into 8
Average (2)
80 W rms
8
90 dB SPL / 1 W @ 1 m
< 0.8%
90 conical
1800 Hz
6.5 " Tannoy Dual Concentric type 1678
Optimised bass-reflex load, in 13 litres
MDF (36 mm) front and back panels,
19 mm high density particle board.
Spray 'F' Vinyl
220 mm x 360 mm x 267 mm
7.5 kg
450 mm x 695 mm x 300 mm
17 kg
Programme
160 W rms