Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Tannoy SYSTEM 600a
Summary of Contents for Tannoy SYSTEM 600a
- Page 1 System 600a USER MANUAL...
-
Page 2: Table Of Contents
Contents INTRODUCTION OPERATING INSTRUCTIONS Unpacking and visual checks Preliminary recommendation Installing and connecting the system Controls and indicators Use close to TV screens and video monitors SYSTEM DESCRIPTION AND PHILOSOPHY Drive unit. Cabinet Active crossover and amplifier SERVICING Cabinet finish Dual Concentric driver removal Drive unit servicing Checking the unit... -
Page 3: Introduction
95 dB for 8 hours per day will eventually cause permanent hearing loss. Because Tannoy monitors have very low levels of time, amplitude and frequency distortion it is not always obvious that the sound pressure level is high whilst working with them. - Page 4 the monitors should be mounted on a rigid structure, preferably with the use of soft pads (rubber, Sorbothane, Blu-Tak etc..). When used in the landscape orientation, we recommend location of the monitors so that the drive units are toed inwards, with their axes oriented towards the listening position. The distance between the two speakers should be about 1.5 to 2 metres, depending on the monitoring position.
-
Page 5: Controls And Indicators
If the source itself has a balanced output, use shielded twin conductor cable (microphone cable) connecting pin 2/T to pin 2/T, pin 3/R to pin 3/R, and pin 1/S to pin 1/S (using the shield). If the source has an unbalanced output, a single conductor shielded cable can be used, connecting pin 2/T of the input to the “hot”... -
Page 6: System Description And Philosophy
The drive unit used in the System 600A monitors is part of the latest generation of Dual Concentric units designed by Tannoy. Amongst many other features, this range of drivers incorporates a dual magnet assembly, ‘tulip’ HF waveguide and injection moulded polypropylene LF cone. -
Page 7: Active Crossover And Amplifier
attention paid regarding the sculptured front panel to provide smooth, rounded edges which minimise side diffractions. Another problem involved in cabinet design is to ensure that the box will effectively behave as neutrally as possible, ideally without interfering at all with the sound field emitted by the drive unit and the port. -
Page 8: Servicing
The surface will change colour when wet but will return to normal when dry. For touch-up of paint chips contact your local Tannoy service agent for materials and guidance. -
Page 9: Amplifier
Coatbridge ML5 4TF Scotland Telephone 01236 420199 (UK) +44 1236 420199 (International) 01236 428230 (UK) +44 1236 428230 (International) E-mail prosales@tannoy.com DO NOT SHIP ANY PRODUCT TO TANNOY WITHOUT PREVIOUS AUTHORISATION. This warranty in no way affects your statutory rights. -
Page 10: Curves
CURVES Figure 3. System 600A. Anechoic response. LF contour ON & OFF Figure 4. System 600A. Effect of HF contour on anechoic response. -
Page 11: Technical Specifications
Tannoy operate a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications which Tannoy reserve the right to alter without prior notice. Please verify the latest specifications when dealing with critical applications. -
Page 12: Declaration Of Conformity
Telephone: +44 (0)1236 420199 Fax: +44 (0)1236 428230 Internet:http://www.tannoy.com Tannoy North America Inc. 335 Gage Avenue, Suite 1, Kitchener, Ontario, CANADA, N2M 5E1 Telephone: (519) 745 1158 Fax: (519) 745 2364 Tannoy Nederland BV, Anthonetta Kuijlstraat 19, 3066 GS, Rotterdam THE NETHERLANDS Telephone: (010) 2860554 Fax: (010) 2860431 Issue 2 Part No.
Need help?
Do you have a question about the SYSTEM 600a and is the answer not in the manual?
Questions and answers