Table of Contents
Advertisement
3. Map the following ports (Type: UDP) to the TalkSwitch units. These RTP
4. If you are setting up external IP extensions, map port 69 (Type: UDP) to
5. If you are setting up TalkSwitch IP phones as external IP extensions, map
6. Map port 9393 (Type: TCP) to the TalkSwitch unit acting as local proxy. Port
7. If available, enable Quality of Service (QoS) to give voice traffic priority
8. Save the configuration to the router.
1 0
ports forward voice traffic to the TalkSwitch system by default.
VoIP Lines/
Unit 1
Unit
4
6000–6006
8
6100–6114
If required, you can map different ports. In this case enter the first port in
the Starting RTP port box of the VoIP Settings window.
the TalkSwitch unit acting as local proxy. Port 69 allows the TalkSwitch
system to configure external IP extensions.
port 8484 (Type: TCP) to the TalkSwitch unit acting as local proxy. Port
8484 allows the TalkSwitch system to configure TalkSwitch IP phones as
external IP extensions.
9393 allows remote configuration of the TalkSwitch system.
over data.
Unit 2
Unit 3
6010–6016
6020–6026
6200–6214
6300–6314
V O I P N E T W O R K C O N F I G U R A T I O N G U I D E
Unit 4
6030–6036
6400–6414
Advertisement
Table of Contents
