Samsung SGH-T999 User Manual page 271

5. Complete the transfer process between the two
NFC-enabled devices by placing them back to back.
This feature can come in very handy to quickly share
pictures between users with compatible S Beam devices. For
more information, refer to "Using S Beam to Share Pictures"
on page 158.
Wi-Fi Direct Setup and Settings
You can configure your device to connect directly with other
Wi-Fi capable devices. This is an easy way to transfer data
between devices. These devices must be enabled for Wi-Fi
direct communication. This connection is direct and not via a
HotSpot or WAP.
Note: Activating this feature will disconnect your current Wi-Fi
network connection.
To give your Wi-Fi Direct connection a unique name:
It can be difficult to pair to external devices if all you have is
a generic name (ex: Android 12345). It is recommended you
provide your connection with a unique name.
1. Press
More settings Wi-Fi Direct.
2. Press then tap Device name.
and then tap Settings
3. Edit the current name and tap OK to save the new
identification.
To activate your connection:
1. Press
More settings.
2. In a single motion touch and slide the Wi-Fi Direct slider
OFF
to the right to turn it on
slider color indicates the activation status.
3. Read the on-screen information and tap OK.
4. Tap Scan and select the single device name to begin
the connection process to another Wi-Fi Direct
compatible device.
– or –
Tap Multi-connect
names to begin the connection process to these Wi-Fi
Direct compatible devices.
Note: The target device must also have Wi-Fi Direct service
active and running before it can be detected by your
device.
5. Tap Done. The direct connection is then established.
and then tap Settings
ON
Scan and select all the device
Changing Your Settings
. The
265