Usb Tethering And Mobile Hotspot - Samsung SGH-T999 User Manual

Wi-Fi Calling Settings
Important! A new ISIM card must be installed within the
device prior to using this feature. Wi-Fi must first
be active and communicating prior to launching
Wi-Fi Calling.
1. Press
More settings Wi-Fi Calling Settings.
2. Tap Connection Preferences and select a preference for
use of the Wi-Fi Calling feature:
• Wi-Fi Preferred: Wi-Fi network is preferred over cellular
network when making calls. Calling requires you to stay in the
Wi-Fi range.
• Wi-Fi Only: Wi-Fi network is required for making calls. Calling
requires you to stay in the Wi-Fi range.
• Cellular Preferred: The cellular network is preferred over a
Wi-Fi network when making calls.
3. Tap OK to save the setting.
4. Tap Help from the the main Wi-Fi Calling Settings page
to navigate through either an on-screen tutorial or
review the top 10 Wi-Fi Calling questions.
and then tap Settings

USB Tethering and Mobile HotSpot

This option allows you to share your phone's mobile data
connection via a direct USB connection between your phone
and computer. A wireless version of this same functionality
would be the Mobile AP feature.
Note: You can not mount your phone's microSD card to your
computer while using the USB tethering feature.
If additional software or USB drivers are required,
navigate to: http://www.samsung.com/us/support/
downloads.
1. Press
More settings Tethering and Mobile HotSpot.
For more information, refer to "USB Tethering" on page 246.
For more information, refer to "Mobile HotSpot" on page
247.
and then tap Settings
Changing Your Settings 263