Removing The Mounting Frames; Connecting The Hard Disk Drive Cables - Epson EL 486UC+ User Manual

lnstalling a Hard Disk Drive in the lnternaI Drive Bay
Your computer may have a hard disk drive already installed in
the internal drive bay. If not, you can install a l-inch high by
31/2-inch wide drive in this bay.
This section includes steps for the following procedures:
Removing the mounting frames from the hard disk drive
(if necessary)

Connecting the hard disk drive cables

Installing the hard disk drive under the mounting bracket
Installing the hard disk drive above the mounting bracket.
Note
Be sure to check the jumper settings on the hard disk drive
before you install it. Also, you may want to know the
number of cylinders, heads, sectors, etc., if the auto-sensing
feature in SETUP cannot correctly identify your drive. See
Chapter 2 and the documentation that came with your drive
for this information.
Before you can install a hard disk drive, you need to remove
any option cards that may be blocking your access to the hard
disk drive area. Once you have installed the drive, replace any
option cards you removed. See Chapter 4 for instructions.
5-2 Installing and Removing Drives